Manufacturers & Suppliers of : Wind Ventilators, Air Ventilators, Turbo Ventilators, Roof Ventilators, Roof Extractors, Ventilation Systems, Wind Driven Turbo Ventilators, Roof Exhaust Systems, Natural, Ventilators, Eco Ventilators, Industrial Ventilators, Warehouse Ventilators, Roof Top Ventilators, Roof Top Extractors, Wind Powered Exhaust Fans, Aluminium Roof Wind Ventilators, Mukta Wind Ventilators, Rotary Ventilators, Air Ventilation Systems, Mukta Turbo Ventilators, Fume, Heat, Smoke Removal, Powerless Ventilators.

MOC of Vanes

Industrial Hi-Grade Aluminum

MOC of Top Plate

Stainless Steel

MOC Bottom of Ring for Variable Slope Adjustment

Stainless Steel

Angle Adjustment Range

0 to 17 Deg.

Weight of Ventilator

06 Kg.

Height of Ventilator

410mm ± 5 mm

Center Width of Ventilator

735mm ± 5 mm

Dia of Top Plate

500mm ± 5 mm

Dia of Bottom Ring

600mm ± 15 mm

Nos of Vanes

42 Nos Rolled Formed

Thickness of Vanes

0.45 mm

Nos of Bearing

02 Nos

Bearing Type

6001 ZZ Permanently Lubricated & Sealed

Rivets

Aluminum Alloy with Washer

MOC of Vanes

SS 304

MOC of Top Plate

SS 304

MOC Bottom of Ring

SS 304

Weight of Ventilator

12 Kg.

Height of Ventilator

410mm ± 5 mm

Center Width of Ventilator

735mm ± 5 mm

Dia of Top Plate

500mm ± 5 mm

Dia of Bottom Ring

600mm ± 15 mm

Nos of Vanes

42 Nos Rolled Formed

Thickness of Vanes

0.45 mm

Nos of Bearing

02 Nos

Bearing Type

6001 ZZ Permanently Lubricated & Sealed

Rivets

S S 304

Sr. No.

Particulars

Specification for FAN Mukta Wind Ventilator 600mm Throat Dia.

1)

Vanes

Vanes made out of FRP (Glass Fibre Reinforced Plastic)  UV Stabilized Isopthalic Resin . No. of Vanes: 42 nos.
Thickness of vanes: 2mm (+/-0.2mm)

2)

Top Plate

Top Plate made out of FRP(Glass Fibre Reinforced Plastic)  UV Stabilized Isopthalic Resin .Dia. Of Top Plate: 500mm (+/-5mm)
Thickness of Top Plate: 2mm (+/-0.2mm)

3)

Bottom Ring

Bottom Ring made out of FRP(Glass Fibre Reinforced Plastic)  UV Stabilized Isopthalic Resin.Dia. Of Bottom Ring: 600mm (+/-5mm) Thickness of Bottom Ring: 2mm (+/-0.2mm)

4)

Fan Spoke Assembly

Fan Spoke assembly made out of SS 316 L Rod. Dia. of Fan Spoke Rod: 5mm.

5)

Bottom Ring Cross Bracket

Bottom Ring Cross Bracket made out of SS 316 L Flat.
Size of Cross Bracket Flat: 18 X 3mm

6)

Shaft

Shaft made out of SS316 L Rod 12 mm Dia.

7)

Shaft Casing

Shaft Casing made out of (UV Stabilised) U-PVC pipe, 32mm Dia.(min), 2 mm Thk (min.)

8)

Shaft Bottom Cap

Shaft Bottom Cap made out of Polypropylene ( PP ), Internal Dia- 34mm, Outer Dia-36mm,
 1mm Thk.

9)

Bearing

2 nos. Permanently sealed & lubricated Bearing of Type 6001 ZZ.

10)

Rivet

SS 304

Specification for BASE PLATE for Mukta Wind Ventilator 600mm Throat Dia.

1)

FRP (Glass Fibre Reinforced Plastic)  UV Stabilized Isopthalic Resin . Translucent Type. Confirming to match existing roof sheet profile.
Size of Base Plate: 1.050 W X 1.6 L Mtrs.
Height of Throat: Higher side- 400mm; Lower side- 310mm
( +/- 5mm)
Top Dia of Throat: 590mm ( +/- 5mm)
Thickness of Base Plate: 2mm (+/- 0.3 mm)